Thank you for downloading EZ Dialup v1.85.

You will find a complete user's manual in EZDIALUP.HLP and EZDIALUP.WRI.
Both the server and client software can be tested immediately.  See the
Server Installation page of the Help file for step-by-step instructions.

This is a complete working version, but dialup clients will receive a nag
message until the server is registered.

Also, if not registered, the server software will stop working 31 days 
after the first install.  Re-installation of the software will not 
extend the time limit.

DELPHI Programmers: for example source code, look for EZDELPHI.ZIP in 
CompuServe's DELPHI forum, or on the EZ Software web site:

    http://ourworld.compuserve.com/homepages/ezsoft

===========================================================================
Changes in v1.85:
 - BYPASSFLOWCONTROL .INI-file option added to support ISDN
 - Corrected potential file-close error after file transfers
 - Added support for use of variables within quotes on EXECUTE command

Changes in v1.84:
 - Variables declared on client side are passed to server

Changes in v1.83:
 - New variables support in script commands
 - Multiple passwords per COMMPASS file supported
 - Automatic port rate step-down attempted when initial syncronization fails

USE BY NON-PROGRAMMERS

Installation of an EZ Dialup system is geared toward anyone who can
install a modem and use a text editor.  Programming experience is
not necessary to create and maintain a dialup system using EZ Dialup's
original Script Mode (Mode A).  And day-to-day use of EZ Dialup is
geared toward anyone who can start a Windows program!

Please see SCRIPT-BASED EZ DIALUP below for a non-techical expanation of the
EZ Dialup system.

USE BY DEVELOPERS

EZ Dialup lets you write programs that access both EZ Dialup Servers AND
most other dialup hosts, like BBS's, etc.  You can integrate the software 
seamlessly into your program, which appears to be doing all the work!

EZ Dialup handles everything - it opens the comm port, inits the modem
and makes sure it's responding, dials the number, then lets your program
know when it's connected and ready, or if a busy signal or some other
problem occurred.

Once your program connects to an EZ Dialup server, it can direct it to
transfer, zip, unzip or delete files, run programs or perform other
functions - every option available in Script-Mode.

When your program connects to a BBS, API routines let it:

   -access all incoming characters
   -send individual characters or entire strings
   -request automatic Xmodem, XModem 1K and Ymodem file transfers
   -setup automatic reponses to expected input ("Login: ", etc.)
   -also setup notification to your program when these input strings
    occur
 
A test program (TESTBED.EXE) and its Pascal source code demonstrate the
use of the extended API.

A Visual Basic interface example is also included.  The files are located in
the EZ4VB.ZIP (included).

Use of the toolkit (when registered) is royalty-free.

Visual Basic and Pascal interface source code examples are included, but
any development language that can call DLL routines and react to Windows
messages (some development platforms call these TRIGGERS) can use the API.

Please see the EZDIALUP.HLP or EZDIALUP.WRI for addtional details.

______________________
SCRIPT-BASED EZ DIALUP

Here's the idea: you dedicate a Windows-running PC as a server to handle
repetitive file transfers, both to and from the server.  Each server PC
can handle up to four modems, and each modem is controlled by the EZDIALUP.EXE
program running in server mode.

Remote users (clients) just launch an icon to dial in, so the program
is very easy for clients to use.  Each icon they can run requests that
a unique script be executed - scripts that have been pre-programmed and
are stored on the server.

These scripts contain simple but powerful commands to move files back
and forth, zip and unzip files, run simple programs, etc.  Script access
is password protected, but the clients do not need to enter their passwords
to use the program.

When all the commands in the script have been executed, the connection
is automatically terminated, the client side shuts down, and the server
side resets for the next call.

Ad-hoc download requests and file directory requests are intentionally
not supported by Script-Mode EZ Dialup, so security is automatically
tight.  Only the file-transfer scripts found on the server side can be
executed.

If a remote user loses security rights (leaves company, etc.) you just
remove or change their password file, or the scripts, or even the user's
network directory, making their client EZ Dialup software useless.

The only piece of information that changes with any frequency for a roaming
remote user (especially a laptop user) is the phone number dialing sequence,
which might, for example, need a prefix of "8," when dialing from a
hotel, or "9," when dialing from an office with a typical PBX, or "*70,"
when calling from a call-waiting-equipped phone at home, etc.

For the convenience of the user a "Change Phone Number" button lets the
user take a short cut to changing the dialing sequence.

____________
REGISTRATION

A 31-day evaluation period is enforced.  The server will not operate
beyond this period unless it is registered.

The registration fee allows a complete site license, covering one or more
servers at one site, and all the clients that access the server(s).

This shareware version can do everything the registered version can, but
a registration reminder pops up on the client side each time the program
ends.  Registration is $75 when you register via CompuServe's Shareware
Registration Service (GO SWREG - #7676), or $65 if you send a check or
money order to:

EZ Software
P.O. Box 181302
Fairfield, OH  45018

If you choose SWREG, CompuServe can bill your account and notify us
immediately that you are registered, at which point we can immediately
e-mail to you the registration codes. 

Purchasing EZDialup with a credit card
--------------------------------------
You can purchase EZDialup by dialing a toll-free number (in the 
U.S.) and using a credit card to make payment.  You will get the 
necessary registration codes from NorthStar Solutions while 
you are on the phone!  

NorthStar provides ONLY registration services and cannot answer 
ANY technical questions!  Send all questions about the programs to 
EZ Software (ezsoft@compuserve.com)

To order with a Visa, MasterCard or Discover card, call 1-800-699-6395 
between the hours of 10am and 8pm EST, Monday through Saturday.  Callers 
outside the U.S. can call 1-803-699-6395 during the same hours.  

The product number for EZDialup is 1234.  The price is $65 (USD).

You can also order online at NorthStar's Web Site:

	http://ourworld.compuserve.com/homepages/starmail/557.htm

You can also send a fax to NorthStar:

	1-803-699-5465   

If you choose the online or fax order method, NorthStar will notify EZ 
Software about your order, and EZ Software will then e-mail registration 
codes to you.

Please provide (or be prepared to provide) the following information 
when ordering: 

* The program you are registering (please include the product number)
* Your mailing address
* Your Visa, MasterCard or Discover # and its expiration date
* Your e-mail address


Thanks again for trying EZ Dialup!
________________________________________________

Our new internet address:  ezsoft@compuserve.com
Our new URL:  http://ourworld.compuserve.com/homepages/ezsoft

Other products by EZ Software:

Courier Plus(New)...use WinCIM to autorespond to e-mail, including SWREG ($19)
EZ Saver	 ...create professional-quality screen savers ($22, $175, $325)
EZ SlideShow	 ...control the presentation of .BMP images, .WAV files ($15)
EZ Animator	 ...playback lists  of .BMP images in continuous loops ($13)
Talking Keyboard ...teach the keyboard's letters, numbers, symbols ($13)  
Football 2000	 ...play Americam football (game and screen saver) ($13)

EZ Dialup and EZ Saver have already earned FOUR STARS from PC Magazine 
Online (www.pcmag.com).

Contact us, via reply to this message, for additional information on 
specific products - or, download the evaluation files from CompuServe's 
WINSHARE forum: EZSAVER.ZIP, EZSLIDE.ZIP,  EZANIM.ZIP, TALKKEY.ZIP AND 
FB2000.ZIP.

Please visit our new Web site at:

	http://ourworld.compuserve.com/homepages/ezsoft